Print to Mill — Rapid Fusion

What this shows

Load the scan of the 3D-printed face, the as-printed mould CAD, and the as-milled CAD.
The parts already share one coordinate frame, so the CAD is used as-is.
See the remaining stock: how much material the mill still has to take off.

Use the bundled sample, or load your own files. Nothing here uses AI or a camera.

New here? Load the whole sample set in one click and jump straight to the result.

Printed face — point cloud

The scan of the physical 3D-printed mould face.

No point cloud loaded.

As-printed mould — CAD (STEP)

The mould as it comes off the printer, before milling.

No as-printed CAD loaded.

As-milled target — CAD (STEP)

The finished mould face, with stock machined away.

No as-milled CAD loaded.

The point cloud and both CAD files are already in the same millimetre frame, so the CAD is used exactly where it sits — no alignment search needed.

Print to Mill demo

Load the full sample demo, or load your own printed-face scan and CAD files.